Intended use:

The electroconductive paste ( lubricant ) is intended for reduction and stabilization of electrical resistance of demountable contacting connections manufactured from similar and different metals in compliance with State Standard Specification (ГОСТ) 10434-82. Application of this lubricant removes the necessity of application of other arrangements for stabilization of electrical resistance: plate springs, metal coating of the contacting surfaces, etc. The lubricant can be used within the range of working temperatures EPS-90: from -60°C to +90°C (short-term operation up to 150°C), EPS-98(EPS-150): from -60°C to +150°C (short-term operation up to 250°C), EPS-98 VT: from -60°C to +250°C (short-term operation up to 300°C),including operation in an environment of aggressive industrial exhausts, high humidity, in dangerously explosive and fire danger productions, under the conditions of humid sea tropical climate.

Method of application:

1. Prior to applying the lubricant onto the contact surfaces, the latter should be preliminarily smoothed out with a card file or metallic brush. The abrasive dust should be removed with rags.
2. A thin layer of the lubricant, with a thickness of not exceeding 1 mm, should be applied onto either of the contacting surfaces, with the help of a spatula.
3. The contact should be assembled according to ГОСТ 10434-82 or according to assembly instructions.
4. The excessive lubricant squeezed out to the peripheral part of the contact, should be collected and placed into the can containing the lubricant.
5. When performing repairs of the contact, the residuals of the lubricant should be removed with the help of an organic solvent, then the surface should be smoothed out according to item 1.
6. After application of the lubricant, the can should be closed tightly. The can should be stored in a cool place.

Safety requirements:

The "EPS 90", "EPS-98", "EPS-150", "EPS-98 VT" lubricant are explosion-safe, fire-safe, it does not have general toxic and irritating effect towards a human organism.
Working with the lubricant should be performed while wearing fabric gloves. After working with the lubricant, and in case of contact of the skin with the lubricant, the hands should be washed with water and soap or other detergents.

Manufacturer's warranty:

The manufacturer guarantees compliance of the lubricant with the requirements of Technical Specifications in case of observance of the rules of transportation and storage.
The warranty period shall be 3 years since the day of putting the contacts with the lubrication into operation.
Terms of storage of the lubricant in a tightly closed container of the manufacturer shall be 2 years.